Iron on Patch Instructions:
 Garment should be clean. Set iron to hottest setting.
Thoroughly iron area of garment where patch will be place.
Place patch on garment, embroidery facing up. 
Place a cloth or light towel over patch and using a slow circular motion, press firmly for 30 seconds.
Turn garment inside out, and iron the back of the patch for 30 seconds.
Let cool for one minute. If edges of patch can be lifted, repeat steps 4/5.
(Permanence of applicaton can be guaranteed by sewing).
IMPORTANT Do NOT use on un-ironable fabrics with a low melting point such as nylons, vinyls or leathers.